JVC AV42PD20ES Instructions Manual page 22

Using the TV's menu
• During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2
terminal.
• When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
• The RGB signals from the TV games cannot be
output. Teletext programmes cannot be output.
• The sub-picture displayed by the PIP function cannot
be output.
• The still picture displayed by the FREEZE function
cannot be output.
20
FEATURES
SLEEP TIMER
You can set the TV to automatically turn off after a
specified period of time.
1 Choose SLEEP TIMER, then press the a
button
A Sub-menu of the SLEEP TIMER function appears.
2 Press the 5 5 5 5 buttons to set the period of time.
Then press the a a button a a
You can set the period of time a maximum of 120
minutes (2 hours) in 10 minute steps.
• One minute before the SLEEP TIMER function turns
off the TV, "GOOD NIGHT!" appears.
• The SLEEP TIMER function cannot be used to turn
off the TV's main power.
• When the SLEEP TIMER function is on, you can
display the Sub-menu of the SLEEP TIMER function
again to confirm or change the remaining period of
time of the SLEEP TIMER function. Press the a
button to exit the menu after confirming or changing
the remaining time.
To cancel the SLEEP TIMER function:
Press the 2 button to set a period of time to "OFF."
BLUE BACK
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
ON:
This function is turned on.
OFF:
This function is turned off.
a a a