Ext Setting - JVC AV42PD20ES Instructions Manual

EXT SETTING

S-IN (S-VIDEO input)
When connecting a device (such as S-VHS VCR) which
enables an S-VIDEO signal (Y/C signal) to be output, you
can enjoy high-quality picture of the S-VIDEO signal (Y/C
signal).
Preparation:
• First, read the Device Instruction Manual and
"Additional preparation" on page 30 to connect the
device to the TV properly. Second, follow the Device
Instruction Manual to set the device so that a S-VIDEO
signal (Y/C signal) can be output to the TV.
• Do not set S-IN (S-VIDEO input) to the EXT terminal
connected to a device which cannot output a S-VIDEO
(Y/C signal). If it is set wrongly, a picture cannot appear.
1 Choose an EXT terminal
2 Press the yellow button and set the S-IN (S-
VIDEO input).
Then press the a a button a a
An S-IN (S-VIDEO input) mark is displayed. You can
view an S-VIDEO signal (Y/C signal) instead of the
regular video signal (composite signal).
To cancel the S-IN (S-VIDEO input) setting:
Press the yellow button and turn off S-IN (S-VIDEO
input) mark. The regular video signal (composite signal)
pictures are resumed.
• The EXT-1 terminal does not support S-VIDEO
signal (Y/C signal) and you cannot set S-IN (S-
VIDEO input) in the EXT-1 terminal.
• Setting S-IN (S-VIDEO input) changes the head
character from "E" to "S". For example, "E2" is
changed to "S2".
• Even an device which enables the S-VIDEO signal
(Y/C signal) to be output may output a regular video
signal (composite signal) depending on the device
setting. If a picture cannot appear because S-IN (S-
VIDEO input) setting has been made, read the device
Instruction Manual carefully again to check for the
device settings.
ID LIST
You can have a name for each of the devices connected to
each EXT terminal. Giving a name to an EXT terminal
makes the EXT terminal number appear on the screen,
together with the name.
1 Choose an EXT terminal
2 Press the blue button to display the name list
(ID LIST)
3 Press the 6 6 6 buttons to choose a name. Then 6
press the a a a button a
The ID LIST disappears and the name is assigned to the
EXT terminal.
• You cannot assign an EXT terminal name not found
in the name list (ID LIST).
To erase a name assigned to the EXT terminal:
Choose a blank space.
4 Press the a a button to complete the setting
a a
DUBBING
You can choose a signal source to be output from an EXT-2
terminal.
You can choose any one of the output signal of the device
connected to the EXT terminal and the picture and sound
from a TV channel you are currently viewing to output it to
the EXT-2 terminal.
1 Press the 5 5 buttons to choose the arrow
5 5
from the menu
2 Press the 6 6 buttons to choose an EXT 6 6
terminal or TV.
Then press the a a button a a
The arrow in the menu represents a signal flow. The left
side of the arrow denotes a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
Using the TV's menu
19