Problems And Their Remedies; Power/Control Panel Problems - Epson DiscProducer PP-100N User Manual

Problems and their remedies

Power/control panel problems

Symptom/Problem Status
The power does not turn on.
The power does not turn off.
A rattling sound is made when
the power is turned on.
"EPSON PP- 100N" remains
displayed and the product
does not work when the power
is turned on.
Check/Remedy Procedure
Hold down the power button for a moment.
Is the power plug disconnected from the outlet?
Check if the plug is inserted only half-way or inserted at a slant.
Are you using a power strip or similar device?
Insert the power plug directly into the wall outlet.
Is power being supplied from the outlet?
Insert the power cable plug for another electronic product to check if
power is being supplied.
Is a job being processed?
The power cannot be turned off while a job is being processed.
The power turns off automatically when the processing of all jobs
finishes.
If you hold down the power button for a moment (at least 3 seconds),
the power off process begins immediately. The jobs are cancelled.
Did you just turn on the power?
The power cannot be turned off for about 15 minutes once the power
is turned on.
The power turns off automatically 15 minutes after "Power off Please
wait" appears on the LCD.
If you hold down the power button for a moment (at least 3 seconds),
the power off process begins immediately.
Are the power LED and ERROR LED flashing?
If the power LED and ERROR LED are flashing, hold down the power
button for a moment (at least 3 seconds).
If the power still does not turn off, unplug the power cable from the
outlet. Then, turn on the power again, and be sure to use the power
button to turn off the power. Leaving the power on can cause drying
and clogging of the print head.
Is there a foreign object (such as blue protective tape for transporting)
inside the product?
Press the power button to turn off the power, and then open the disc
cover and check that there are no foreign objects inside.
Repair is required.
Please contact Epson Information Center.
Troubleshooting
151