Advertisement
This is a simple step by step guide to
setting up and operating the Epson Powerlite
projector
1
Plug in the projectors power cable and press the power button.
2
Plug in the projector's VGA cable, tightening the screws on the
plug. Plug the other end into the computer or other compatible device
capable of video output.
3
Focus the projector's lens so that the picture is clear and well
defined. For best results, use a projection screen (a large white wall
works just as well!)
4
You are done! For further instruction on how to operate the
projector with an OSX or Windows 7 computer, consult the sections
below.
DMC
Digital Media Center
Getting Started
dmc@doit.wisc.edu
608-265-4817
2
Advertisement
