Disable The Dhcp Server - D-Link DSL-G624T User Manual

Disable the DHCP Server

To disable DHCP, click to select the No DHCP option and click on the Add/Apply button. Choosing this
option requires that workstations on the local network must be configured manually or use another DHCP
server to obtain IP settings.
If you configure IP settings manually, make sure to use IP addresses in the subnet of the Router. You will
need to use the Router's IP address as the Default Gateway for the workstation in order to provide Internet
access.
DSL-G624T Wireless ADSL Router User Guide
LAN Setup menu with DHCP disabled
Notice: To manually configure IP settings on Menus workstations, open
the TCP/IP Properties menu and select the "Use the following IP address"
option. You will need to supply the IP addres, Subnet mask and Defualt
gateway (use IP address of Router for each workstation. The example
here also uses manually configured DNS settings.
37