D-Link DSL-G624T User Manual page 85

Configure Menus 2000 for DHCP
In the Control Panel, double-click the Network and Dial-up Connections icon.
1. In Network and Dial-up Connections menu, right-click the Local Area Connection icon, and then
select Properties.
2. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click
Properties.
3. In the Internet Protocol (TCP/IP) Properties dialog box, click the button labeled Obtain an IP address
automatically.
4. Double-click OK to confirm and save your changes, and then close the Control Panel.
Your computer is now ready to use the Router's DHCP server.
Menus\ 95 and Menus 98
First, check for the IP protocol and, if necessary, install it:
1. In the Menus task bar, click the Start button, point to Settings, and then click Control Panel.
Double-click the Network icon.
2. The Network dialog box displays with a list of currently installed network components. If the list
includes TCP/IP, and then the protocol has already been enabled, skip to Configure IP Information
Menus 95, 98.
3. If TCP/IP does not display as an installed component, click Add. The Select Network Component
Type dialog box displays.
4. Select Protocol, and then click Add. The Select Network Protocol dialog box displays.
5. Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols
list box.
6. Click OK to return to the Network dialog box, and then click OK again. You may be prompted to
install files from your Menus 95/98 installation CD. Follow the instructions to install the files.
7. Click OK to restart the PC and complete the TCP/IP installation.
Configure Menus 95 and Menus 98 for DHCP
1. Open the Control Panel menu, and then click the Network icon.
2. Select the network component labeled TCP/IP, and then click Properties.
3. If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
4. In the TCP/IP Properties dialog box, click the IP Address tab.
5. Click the Obtain an IP address automatically option.
6. Double-click OK to confirm and save your changes. You will be prompted to restart Menus.
7. Click Yes.
8. When it has restarted, your computer is ready to use the Router's DHCP server.
DSL-G624T Wireless ADSL Router User Guide
78