Colour System; Digipure Pro - JVC AV28X25EI Instructions Manual

AV32&28X25EKS&EIS.fm Page 20 Friday, April 12, 2002 1:38 PM
Using the TV's menu
MIN:
The level of the DIGITAL VNR effect is set
to the minimum. If you set the DIGITAL
VNR function to AUTO but feel that the
sharpness of the original picture has not been
reproduced fully, change the setting from
AUTO to MIN.
• The MIN setting is not suitable for low-
quality pictures which contain a lot of
noise.
MAX:
The level of the DIGITAL VNR effect is set
to the maximum. If you set the DIGITAL
VNR function to AUTO but still notice some
noise, change the setting from AUTO to
MAX.
• The MAX setting is not suitable for high-
quality pictures which contain very little
noise.

DigiPure Pro

The DigiPure Pro function uses the latest in
digital technology to give you a natural-
looking picture. The DigiPure Pro function
includes the following two functions.
DigiPure function:
This function helps to create a natural-looking
picture by eliminating unnecessary edges
from high-contrast and crisp images. For
images with low-contrast, edges are added to
produce a sharper, more detailed picture.
You can choose from the three DigiPure
function settings of AUTO, MIN and MAX.
• If you set the DigiPure effect too high on
a low-quality picture that contains a lot of
noise, this may actually make the noise
worse. We recommend you use the
AUTO setting if you can.
Picture motion compensation
function:
This function displays fast-moving pictures
(for example, the players or ball in a football
game) more smoothly and naturally on the
screen.
• The effect level of the picture motion
compensation function cannot be
changed. The effect level is the same no
matter which of the AUTO, MIN or MAX
settings is used.
20
$9 ;(.6 (,6  /&7$8  (1*/,6+
1 Choose DigiPure Pro
2 Press the 5 5 buttons to choose a
5 5
setting. Then press the a button

COLOUR SYSTEM

The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
COLOUR SYSTEM
PAL
BACK
TV OK
D1016-EK
1 Choose COLOUR SYSTEM then
press the a button
2 Press the 5 buttons to choose
the appropriate colour system.
Then press the a button
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from
the input signal. You can only use this when
you are viewing a picture from programme
number PR 0 (AV), or EXT terminal.
• The AUTO function may not work
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
• You cannot choose NTSC 3.58 or NTSC
4.43 for programme number PR 0 (AV) to
PR 99.