Hyper Sound Function - JVC AV28X25EI Instructions Manual

Natural vision t-v link
Table of Contents

Advertisement

AV32&28X25EKS&EIS.fm Page 14 Friday, April 12, 2002 1:38 PM
Remote control buttons and functions
FULL:
This uniformly stretches the left and right
sides of a normal picture (4:3 aspect ratio) to
fill the wide TV screen.
• For 16:9 aspect ratio pictures that have
been squeezed into a normal picture (4:3
aspect ratio), use the FULL mode to
restore the picture to its original shape.
Choose the ZOOM mode
1 Press the c button to display
the ZOOM menu
2 Press the 6 buttons to choose a
ZOOM mode. Then press the a
button
The picture expands and the chosen
ZOOM mode is displayed in about 5
seconds.
• You can pre-set a ZOOM mode for the
normal picture. See "4:3 AUTO
ASPECT" on page 21.
Adjusting the visible area of the
picture
If subtitles or the top (or bottom) of the
picture are cut off, you can adjust the visible
area of the picture manually.
1 Press the c button
The ZOOM menu appears.
2 Press the a button to display the
ZOOM mode indicator
The indicator appears.
14
$9 ;(.6 (,6  /&7$8  (1*/,6+
3 While it is displayed, press the 6
buttons to change the position of
the picture
• You cannot adjust the visible area in
REGULAR or FULL mode.

HYPER SOUND function

You can enjoy sounds with a wider
ambience.
Press the / (HYPER SOUND) button
to turn the HYPER SOUND function on
or off
• The HYPER SOUND function does not
work properly with mono sound.
• The HYPER SOUND function can be
also turned on or off by using the SOUND
SETTING menu. For details, see
"HYPER SOUND" on page 22.
• When HYPER SOUND is on, the balance
cannot be adjusted.
6
6
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Av28x25ekAv32x25eiAv32x25ek

Table of Contents