Step 1:
1. Attach the Tow Bar Mounting Plate to the Rear Crossbeam using Hex Bolt M10x20 and Nylon Lock Nut
M10. (Please see picture 1)
Step 2:
1. Block up the machine higher than the radius height of wheel (21cm), and make sure the machine stable,
then slide out the feet.
2. Attach the Wheel Assembly to the Frame using Hex Bolt M10x70, Flat Washer Ø10 and Nylon Lock Nut
M10. (Please see picture 3)
ASSEMBLY INSTRUCTIONS
- 13 -