Operating Instruction - JIASHAN SUPERPOWER TOOLS SMA700 Assembly & Instruction Manual

Towing the 700 SAW BENCH
1. When towing, hitch the coupler onto the connector of the tractor, then slide in the feet.
2. When arrive to the destination, slide out the feet, make the coupler separate from the connector.
Operating Zone
A. In the operating process, fixe machine on a level surface, the ground near the machine is level, maintain
good, no loose materials (such as wood shavings, standard compound)
B. Provide sufficient lighting or local lighting;
C. Inventory and finished products should be placed in near normal work of the operator location;
D. When no one beside the machine, should stop machine running;
E. When found safety covers or saw blades failure should report immediately;
F. Use safety measures to cleaning, maintenance and cleaning wood and dust to eliminate the risk of fire
dust;
G. Pay attention on the highest speed marked on the blades;
H. Always wear helmet, safety glasses, earflap, gloves and other preventer when operating.
I. Always operating by two people.
J. Do not cut the wood which is less than 100mm of the length.

OPERATING INSTRUCTION

- 10 -