Table of Contents
Advertisement
Quick Links
700 SAW BENCH
Certified Model: SMA700
JIASHAN SUPERPOWER TOOLS CO., LTD
ADD: NO.391 HUIMIN ROAD, HUIMIN TOWN, JIASHAN COUNTY, ZHEJIANG, P.R.CHINA
ASSEMBLY & INSTRUCTION MANUAL
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and
cleaning procedures. Keep this manual and the receipt in a safe and dry place for future reference.
Advertisement
Table of Contents
Summary of Contents for JIASHAN SUPERPOWER TOOLS SMA700
- Page 1 700 SAW BENCH Certified Model: SMA700 JIASHAN SUPERPOWER TOOLS CO., LTD ADD: NO.391 HUIMIN ROAD, HUIMIN TOWN, JIASHAN COUNTY, ZHEJIANG, P.R.CHINA ASSEMBLY & INSTRUCTION MANUAL SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and...
-
Page 2: Table Of Contents
Table of Contents Important Safety Information ................3-7 Directions for Use and Specification ..............8 Machine Components Identification ............... 9 Operating Instruction ..................10-11 Noise Statement / Attention in Whole Life Cycle/ Common Failure ..... 12 Assembly Instruction ................... 13 Change Saw Blade Step .................. -
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION 1. In the operating process, fixed on a level surface in machine, the machine is the ground near the level, maintain good, no loose materials (such as wood shavings, standard compound) 2. When found shields or saw blades failure shall immediately report 3. -
Page 4: General Safety Warnings
General Safety Warnings WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in fire and/or serious injury. Save all warnings and instructions for future reference. 1. Work area safety a. Keep work area clean and well lit. Cluttered or dark areas invite accidents. b. - Page 5 storing machine. Such preventive safety measures reduce the risk of starting the machine accidentally. e. Store idle 700 SAW BENCH out of the reach of children and do not allow persons unfamiliar with machine or these instructions to operate the machine. 700 SAW BENCHs are dangerous in the hands of untrained users.
- Page 6 SPECIFIC SAFETY WARNINGS 1. Maintain labels on the machine. These carry important safety information. 2. Avoid unintentional starting. Prepare to begin work before operating the machine. 3. Industrial applications must follow OSHA requirements. 4. Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function.
- Page 7 Do not use dull or damaged Saw Blade. Unsharpened or improperly set Saw Blades produce a narrow kerf causing excessive friction, Saw Blade binding and kickback. Never rip a woodstock that is twisted or warped, or does not have a straight edge to guide along the Rip Fence.
-
Page 8: Directions For Use And Specification
DIRECTIONS FOR USE 700 Saw Bench has advantage with compact structure, beautiful shape, small cover area, safe and reliable use, quick sawing speed, no need to assemble before use, maintenance convenience etc, and it is suitable for household sawing wood. SPECIFICATION Engine……………......13HP Blade Size……………………………..Ø700x3.2mm... -
Page 9: Machine Components Identification
MACHINE COMPONENTS IDENTIFICATION 1). 50mm Coupler 2). Frame 3). 12V Battery 4). Wheel Assembly 5). Support Leg 6). Operating Platform 7). Large Cover 8). 13HP Electric Start Engine 9). Saw Bit 10). Belt Cover 11). Belt Tensioner - 9 -... -
Page 10: Operating Instruction
OPERATING INSTRUCTION Towing the 700 SAW BENCH 1. When towing, hitch the coupler onto the connector of the tractor, then slide in the feet. 2. When arrive to the destination, slide out the feet, make the coupler separate from the connector. Operating Zone A. - Page 11 OPERATING INSTRUCTION Adjusting the Engine 1. Clockwise rotate the Threaded Rod M10x120 (#54), the engine move outward, the belt will be tighten. 2. Counterclockwise rotate the Threaded Rod M10x120 (#54), the engine move inward, the belt will be loosen. - 11 -...
-
Page 12: Noise Statement / Attention In Whole Life Cycle/ Common Failure
NOISE STATEMENT The figures quoted are emission levels and are not necessarily safe working levels. Whilst there is a correlation between the emission and exposure levels, this cannot be used reliably to determine whether or not further precautions are required. Factors that influence the actual level of exposure of the workforce include the characteristics of the work room, the other sources of noise etc. -
Page 13: Assembly Instruction
ASSEMBLY INSTRUCTIONS Step 1: 1. Attach the Tow Bar Mounting Plate to the Rear Crossbeam using Hex Bolt M10x20 and Nylon Lock Nut M10. (Please see picture 1) Step 2: 1. Block up the machine higher than the radius height of wheel (21cm), and make sure the machine stable, then slide out the feet. -
Page 14: Change Saw Blade Step
CHANGE SAW BLADE STEP Figure 1 Figure 2 1.See figure 1, take off the Hex Blot M6x30 and Lock Nut M6 on #1 Pull Rod and Lock Nut M8 on position #2, put the work table on ground. 2. See figure 2, take off the saw blade and change it. Schematic Diagram - 14 -... -
Page 15: Maintenance And Servicing
MAINTENANCE AND SERVICING Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, improper mounting of the Saw Blade and any other condition that may affect its safe operation. -
Page 16: Parts Drawing
PARTS DRAWING - 16 -... -
Page 17: Parts List
PARTS LIST Part # Description Part # Description Frame Bearing Support Bushing Nylon Lock Nut M10 Hex Bolt M8x16 Flat Washer Ø10 Hex Bolt M8x35 Round PinB8×8 Large Cover Flat Washer Ø16 Long Slotted Plate Saw Blade Clamping Plate Rear Support Leg (Inner) Wheel Axle Base Saw Blade... - Page 18 PARTS LIST Part # Description Part # Description Hex Bolt M12x70 Threaded Rod M10X350 Hex Nut M12 Lock Washer Ø8 Front Pin Handle Assembly Conical Roller Bearing Bakelite Ball Conical Hex Bolt M12x25 Big Washer Ø8 Hex Nut M12 Hex Bolt M12x90 Flange Nylon Lock Nut M12 Flat Washer Ø20...