Table of Contents
Advertisement
2.6
Cable Connection
Connect the signal cable and power cable as follows.
0
Confirm that the power switches of the image scanner and host computer
have
been set to OFF.
8
Connect the image scanner to the host computer with signal cables V and R.
Signal cable V
!Ggnal cable R
Screw
To host computer
To host computer
Figure 2.7
Signal cable connection
Insert the two cables as shown in Figure 3.3. Fasten the two catches to signal cable V
and fix signal cable R with the screws.
The other end of each cable should be attached to the host computer in the same way.
2-8
50FH5014E-0.1
Advertisement
Table of Contents
