Advertisement
Thank you for purchasing the Professional Sound Corporation PowerMax power
distribution system. PSC is confident that the PowerMax has set new standards
for clean, quiet powering of your portable audio equipment. Please feel free to
contact us at the address below if you have any comments, suggestions, or
questions about your new PSC PowerMax. Additionally, we are always open to
suggestions for new products that you would like to see developed.
PSC extends a one-year parts and labor warranty to all PowerMax system
owners who return their warranty card at the time of purchase. This warranty
gives you specific rights, which are stated on the card, and enables us to keep
you informed of product updates.
The PSC PowerMax provides all of the various voltages required to power your
entire digital audio recording package. Its rugged design allows for complete
confidence that you will have uninterrupted power throughout your recording
sessions.
PLEASE BE SURE THAT YOU HAVE READ AND UNDERSTOOD THIS
ENTIRE
OPERATIONAL
POWERMAX!
CAUTION! THE CASE AND HEATSINK ASSEMBLY OF THE POWERMAX
MAY GET HOT DURING USE. DO NOT ALLOW ANYTHING TO TOUCH THE
TOP OF THE HEATSINK DURING USE. ALWAYS ALLOW AT LEAST A ONE-
INCH AIR GAP ABOVE THE HEATSINK.
ALL
AUXILARY
PROTECTED AND PROPERLY FUSED AT ALL TIMES.
THE POWERMAX IS DESIGNED FOR USE WITH SEALED LEAD ACID
BATTERIES ONLY!
MANUAL
EQUIPMENT
SHOULD
Professional Sound Corporation
28085 Smyth Drive
Valencia, CA 91355 USA
PH (661) 295-9395
Fax (661) 295-8398
Email:
sales@professionalsound.com
Web:
www.professionalsound.com
BEFORE
OPERATING
BE
REVERSE
THE
PSC
POLARITY
Advertisement
