TABLE OF CONTENTS Introduction Package Contents Features Consumer Guide to Product Safety Knowing your Receiver Knowing Your Transmitter Installation & Setup Receiver/Transmitter Operation Troubleshooting Radio Interference Advice Warranty Notes...
Your Mobi® Pure Sounds™ uses a digital transmission to ensure clear and con- sistent audio transmission. The signal also passes easily through interior walls. However, buildings with metal frames or placing the transmitter near large metal objects may cause signal degradation.
PACKAGE CONTENTS 1 x Receiver Unit (#70294R) 1 x Transmitter Unit (#70294T) 1 X Receiver Power Cord 1 X Transmitter Power Cord 1 x Rechargeable Battery Pack NOTE: If you find any of the contents are missing or should you need to order replacement parts, please contact the manufacturer or visit www.getmobi.com.
FEATURES • Trasmission Range up to 600Ft • 2.4 GHz Private Digital Transmission • No installation needed—ready to use • Compact design for easy portability • Auto Mute with Voice Activation • Low Battery and Out of Range Indicators • Rechargeable Batteries Included for Receiver •...
CONSUMER GUIDE TO PRODUCT SAFETY Please read this instruction manual before using your Mobi® Pure Sounds™ sys- tem. When using electrical appliances, basic safety precautions should always be followed. Please keep safe for future reference. • This product is not intended to be used as a medical monitor and its use should not replace adult supervision.
Page 7
• Always use transmitter and receiver where there is adequate ventilation. To prevent overheating, keep away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat. • Use only a dry cotton cloth to keep the units free of dust. Do not use a damp cloth, water, or liquid cleaner of any kind.
KNOWING YOUR RECEIVER Button & LED Functions Power On/Off Button Volume Up ( + ) Volume Down ( - ) Sound Level Indicator (LED will flash indicating noise level increase) Power On Indicator (battery charge indicator) Link Indicator LED (LED will blink if connection is poor/lost) Speaker DC Jack (5V/600mA) Belt Clip...
INSTALLATION & SETUP The Mobi® Pure Sounds™ transmitter is designed to be powered by either rechargeable batteries (provided) or the AC/DC adaptors. Using AC/DC adaptor: • Plug the connector of the AC adaptor into the DC Jack on the unit (fig.
RECEIVER/TRANSMITTER OPERATION Receiver Power ON/OFF Press the Power On/Off Button (fig. 1 pg. 6) to turn on your receiver. The power indicator light (fig. 5 pg. 6) will turn red indicating receiver is ON. Volume Adjustment Press the volume up (fig. 2 pg. 6) or volume down (fig. 3 pg. 6) to adjust the volume to the desired level.
TROUBLESHOOTING Problem Solution • Check AC/DC Connection. • Confirm power outlet is working properly. Transmitter will not • Charge Battery Pack turn on • Check AC/DC Connection. Receiver will not turn • Confirm power outlet is working properly. Battery does not •...
RADIO INTERFERENCE ADVICE FCC Statement 15.19: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interfer- ence that may cause undesired operation.
After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty ser- vice, please return the product to Mobi along with a dated sales receipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies, Inc.
Need help?
Do you have a question about the Pure Sounds Audio Monitoring System and is the answer not in the manual?
Questions and answers