Related Manuals for Mobi Technologies Secure Start
Summary of Contents for Mobi Technologies Secure Start
- Page 1 wireless audio/video monitoring system Complete Compatible w ith… Operating Compatible w ith… Instructions 70294...
-
Page 2: Table Of Contents
Fig. 3 – Secure Start Camera placed close to the router. Your signal strength will return to normal once Fig. 4 – Secure Start Monitor – Left / Front View the units are placed farther from the router or once they are turned off. -
Page 3: Features
FEATURES CONSUMER GUIDE TO PRODUCT SAFETY • 2.0” LCD Color High Resolution TFT LCD Display Please read this instruction manual before using your Mobi Secure Start sys- ® ™ tem. When using electrical appliances, basic safety precautions should always • Voice Activated Picture & Sound with Auto Mute be followed. • Transmission Range up to 400 ft Note: Please keep this manual for future reference. -
Page 4: Know Your Monitor
KNOW YOUR CAMERA • Remove the batteries from the Monitor during long periods of non-use, as bat- teries can leak. • Unplug the AC adapters from the Monitor and the Camera during periods of non-use. To disconnect from the power supply, grip the transformer and pull from the power socket. Never pull by the cord. • Only use the Monitoring System with the supplied power adapters. KNOW YOUR MONITOR Button & LED Functions: (Fig. 4) Two-Way (TALK) Button 2 Power Selector (OFF • AUDIO • ON) (battery charge indicator) Belt Clip... -
Page 5: Powering Up
POWERING UP Recharging the Rechargeable Batteries • Charging when Monitor is “ON” – The LED indicator will show red while charg ing and will turn fully green when fully charged. The Mobi Secure Start Camera is powered by an AC/DC Adapter while the ® ™ • Charging when Monitor is “OFF” – LED indicator will show red while charging, Monitor can be powered by either rechargeable batteries or an AC/DC Adapter once fully charged, it will briefly turn green and then turn off. Turn on Monitor to... - Page 6 Menu Settings Next press the Menu Button again to select that operation and then use the Press the Menu Button (Fig. 4; no. 6) to “+” and “-” Buttons again to adjust the enter the menu operation mode. There sensitivity to the desired level (Fig. 13) are 3 operations you can adjust as shown ...Lo, Mid, or Hi sensitivity to noise.
-
Page 7: Linking The Units
• Then on the Camera: Press and hold the LINK Button (Fig. 7, no. 16) until its power ON indicator starts blinking. • The system will complete the unit matching process automatically. • Once properly linked the monitor will display the image transmitted from the camera. Note: Secure Start™ is a single Camera system and does not support multiple cameras. -
Page 8: Troubleshooting
Purchaser is respons- RADIO INTERFERENCE ADVICE ible for shipping the product to Mobi Technologies, Inc. at the address indicat- ed below and for all associated freight and insurance costs. This warranty does... - Page 9 Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free Number (877) 662-4462 www.getmobi.com Mobi and Secure Start are registered trademarks of Mobi Technologies, Inc. © 2012 Mobi Technologies, Inc. All Rights Reserved...
Need help?
Do you have a question about the Secure Start and is the answer not in the manual?
Questions and answers