Setting Down, Transportation And Storage - Miele HS15 Operating Instructions Manual

en
At the end of the pause, you can do
one of the following:
^ Press the Stand-by button again to
switch the vacuum cleaner back on
at the setting you were using before
pausing it.
^ Press the + button to switch the
vacuum cleaner back on using the
highest power setting.
^ Press the - button to switch the
vacuum cleaner back on using the
lowest power setting.
Setting down, transportation
and storage
Parking system for pauses in
vacuuming (dia. 29)
(cannot be used with the SEB 234 L
Electro Premium Electrobrush)
A parking system has been designed
for conveniently parking the suction
tube and floorhead during pauses.
^ Slot the floorhead into the parking
attachment at the back of the
vacuum cleaner.
If the vacuum cleaner is on a
sloping surface, e.g. a ramp, retract
the telescopic tube fully.
Switching on and off with the parking
system
Some models are fitted with an On/Off
switch in the parking system.
The vacuum cleaner switches off
automatically when the floor head is
slotted into the parking system with the
parking attachment.
42
When the floorhead is removed from
the parking system the vacuum cleaner
switches back on at the last selected
power level (not on models with
radio-operated handle).
Parking system for storage (dia. 30 +
31)
,
Always disconnect the vacuum
cleaner from the electrical supply
when you have finished using it.
Switch the vacuum cleaner off at the
wall socket and unplug it.
^ Stand the vacuum cleaner upright
when it is not being used and when it
is being stored.
Retract the telescopic tube fully.
^ Slot the floorhead downwards into
one of the parking attachments on
either side of the vacuum cleaner
(the parking attachments cannot be
used with the SEB 234 L Electro
Premium Electrobrush).
This makes the vacuum cleaner easier
to carry or store.
If your vacuum cleaner has an XXL
handle, you can detach this so that the
vacuum cleaner requires less storage
space.
^ Detach the XXL handle from the
retracted suction tube.
^ Wind the suction hose around the
suction tube and then slot the XXL
handle into the second parking
attachment.