Accessing The Control Unit Connections - Viessmann VITODENS 222-F Installation Instructions Manual
Floor mounted, gas-fired condensing storage combi boiler
Hide thumbs
Also See for VITODENS 222-F:
- Installation and service instructions manual (172 pages) ,
- Installation and service instructions for contractors (156 pages) ,
- Technical manual (156 pages)
Table of Contents
Advertisement
Vitodens 222-F, B2TA 19 and 35 Installation
Connections
(continued)
Accessing the control unit connections
1. Remove both screws from the external accessory
connection box front plate and set aside.
2. Loosen both retaining screws as shown (do not
remove).
3. Pull the external accessory connection box forward
until the retaining screws are clear of the guides (built
into the rails).
4. Swing the external accessory connection box down.
Boiler Connections
17
Hide quick links:
Advertisement
Table of Contents
