Additional Preparation - JVC AV-28WFT1EK Instructions Manual

Connect the device to an EXT terminal other than the EXT-1
terminal.
You can choose a video input signal from the S-VIDEO signal
(Y/C signal) and regular video signal (composite signal). For
details of how to operate the device, see "(S-VIDEO in-
put)" on page 21.
Be sure to connect the T-V LINK compatible VCR to the EXT-
2 terminal. If not, the T-V LINK function will not work properly.
Note:
When connecting a T-V LINK compatible VCR to the EXT-
2 terminal, be sure to connect the Decoder to the VCR. If
not, the T-V LINK function may not work properly. After
you have registered TV channels to the Programme num-
bers (PR), set the DECODER (EXT-2) function for the Pro-
gramme number (PR) to ON in order to unscramble a
scrambled TV channel. For details of operation, see "Us-
ing the DECODER (EXT-2) function" on page 30.
Connect the headphones with a stereo mini-jack (of 3.5mm in
diameter) to the headphone jack at the TV front panel.
Note:
When you connect the headphones, the TV speakers is-
sue no sound.
You can arbitrarily change over the output of the video/sound
signal from the EXT-2 terminal. It is useful when you want to
dub the video/sound from another device on the VCR con-
nected to the EXT-2 terminal. For details on how to do this op-
eration, see "DUBBING" on page 22.
The output of video/sound signal of a TV channel you are cur-
rently viewing is always output from the EXT-1 terminal.
Note:
Changing over a Programme number (PR) also changes
over the TV output from the EXT-1 terminal.
The video/sound signal from an EXT terminal cannot be
output.
Teletext programmes cannot be output.

ADDITIONAL PREPARATION

While referring to the Audio equipment connection diagram,
connect the audio equipment you desire to the TV.
You can use external front speakers to listen to the TV sound
instead of the TV speakers. For details of how to operate
them, see "Setting the SPEAKER function" on page 31.
Before connecting anything:
Read the manuals provided with the amplifier and speak-
ers.
Turn the TV and Amplifier off.
To prevent magnetism from the speakers adversely ef-
fecting the TV screen, use magnetic-shielded speakers
for the front speakers.
Note that connecting cables are not supplied.
L
R
AUDIO OUT
(Terminals on rear)
1 Amplifier
2 Front speakers (Magnetic-shielded type)
Note:
The output from the AUDIO OUT terminal is not interrupt-
ed by headphone connection to the TV. You cannot cut
the sound from the front speaker even if you connect a
headphone to the TV.
2
1