Advertisement
13. Lift off the display and set it
aside.
15. Disconnect the GlidePoint cable.
17. Remove 1 screw from the
GlidePoint bracket, lift it out and lift
out the GlidePoint sensor and button
board.
19. Disconnect the key lock LED
cable, remove the tape from it and
remove the LED board.
14. Use the plastic screwdriver to pry
off the palm rest
16. Turn the palm rest over and
disconnect and remove the
GlidePoint cable.
18. Lift up the Hard Disk Drive,
disconnect its cable and remove it.
20. Remove 3 screws from the
modem, disconnect the RJ11 cable
from it and remove it.
Advertisement
