Advertisement
5. Remove all 8 screws from the
lower case.
7. Using a plastic screwdriver, pry up
and remove the speaker/status LED
cover.
9. Disconnect the 2 antenna cables
from the WLAN card, disconnect the
speaker cable and un-tape it from
the top of the card.
11. Lift up the adhesive backed wire
guide, disconnect the display cable
and free it and the antenna cables
from underneath.
6. Turn the unit over, open the cover
and lay it flat.
8. Tilt up the keyboard, slide it
forward to release it, disconnect its
cable and remove it.
10. Remove the WLAN card by
pressing outward on the locking
clips.
12. Turn the unit up on its front and
remove 2 screws from the rear of the
case.
Advertisement
