Clover CDR 0440 Instruction Manual page 51

INITIALIZE Initialize the PTZ settings of the selected camera.
PRESET
Select the PRESET and press the left key (
input window will appear. Set the number (3 digits) using the number key and press
the SEL to set the preset number for the current position.
Press the right key (
to go to the preset number.
TOUR
Select the TOUR and press the right key (
input window will appear. Set the number (1 digit) using the number key and press
SEL to make the group number work.
Press the left key (
User can set the preset number in the tour group of the OSD menu.
OSD Select the OSD to enter the menu. Control keys are Right, Left, UP, Down, Select, Far
(REW KEY), and Near (FF KEY). Press the ESC button to return to the main menu.
Press the PTZ button to escape from the OSD menu.
AUTOSCAN
Press the right key (
Press the left key (
PTZ Press the PTZ button to escape from the OSD menu.
Press the ESC button to return to the main menu.
ESC
NUMBER Available only on the TOUR and PRESET menu.
Available only on the OSD menu.
: Far /
Preset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 and
PMA-200. (Select it in the NAME of PTZ setup menu)
)
on the control button and set the number (3 digits)
)
on the control button to stop tour.
)
on the control button to start auto scan
)
on the control button to stop auto scan.
: Near
Table 5.1.2. Description of RS-485 port
Data +
Data -
51
)
on the control button. Then, number
)
on the control button. Then, number