Clover CDR 0440 Instruction Manual page 33

USA
EU
OTHERS
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can't be applied, if the date of BEGIN and END is same.
CLIENT ACCESS Enable/Disable remote access through network client software.
BANDWIDTH Enable/Disable only key frame transmission. "ON" mode is favorable for use of
SAVING low network bandwidth. Mostly, set "OFF" for normal use.
SEND EMAIL Enable/disable the send e-mail function.(ON/OFF)
TRANSMISSION MODE: Enable sending image of the channel that triggered
the alarm when an alarm event is triggered.
IP NOTIFICATION: Enable/disable sending e-mail when the IP address of your
DVR is changed.
EVENT ALARM: Enable/disable sending e-mail reports on the channel that
triggered the alarm when an alarm event is triggered.
1. OFF: Daylight saving is not set.
2. USA: Applies the USA daylight saving time.
3. EU: Applies the EU daylight saving time.
- Select the GMT AREA using the control button (
- Set the time difference with the standard time using the control button
( ).
4. OTHERS: If the time zone is neither USA nor E, set the start and end
date of the daylight saving period.
- Select BEGIN or END using the control button (
and press the SEL button.
- Select the item using the control button (
the setting value using the control button (
press the ESC button to return to SET DATE & TIME setup
menu.
33
).
)
), select
) and