Step Two: Re-Miking The Signal - Two Notes TORPEDO VB-101 User Manual

On the following table we are listing the various options you have with the TORPEDO VB-101. It is
very hard to play while hearing a dry sound only, and we indicate on which channel you can get
a wet signal (i.e., with the speaker simulation on). You can choose to record the Wet signal or not,
depending on your DAW configuration and capability.
Dry channel
PRE SIM
Analog or Digital Out LEFT
Analog or Digital Out RIGHT

4.2 Step two: re-miking the signal

You need to build a loop between the TORPEDO VB-101 and your DAW. You can create either a
digital or an analog loop. To create a loop, connect both input and output of the TORPEDO VB-101
to the DAW:
1. The dry signal is sent from the DAW to the TORPEDO VB-101. On most sequencers, that track
must be routed to a dedicated output, not the master output track.
2. Choose the appropriate miking parameters on the TORPEDO VB-101; the dry signal is processed.
3. The wet, processed signal is sent to a new track on the DAW. That track can be routed to the
master track and activated for real-time listening.
Audio Interface
Line In L R
Line Out L R
POWER OPTIONAL ETHERNET
SYNC MIDI
IN IN OUT/THRU
R o H S WORDCLOCK
2002/95/EC
CAUTION NOTICE
REPLACE FUSE WITH SAME FUSE TYPE AND RATING LEFT RIGHT
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAUTION
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE. AUDIO ENGINEERING ALWAYS CONNECT YOUR AMP
CAUTION OUTPUT TO A SUITABLE LOAD.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK MADE IN FRANCE
DO NOT REMOVE COVER.
SERIAL NUMBER
CAUTION ! DO NOT SET YOUR AMP MASTER
VOLUME TO MAX IN ORDER
RISK OF ELECTRIC SHOCK TO AVOID POSSIBLE DAMAGES . POST SIMULATION
DO NOT OPEN ANALOG OUPUTS
AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
Dry send (DAW to TORPEDO)
1
Line Out to Line In
2
S/PDIF Out to S/PDIF In
3
AES Out to AES In
Note: Wordclock is optional in a digital loop. Use it if you have several digital products that need
to be synchronized to your DAW.
Two Notes Audio Engineering
Wet channel Output mode
Stereo
Analog or digital
Dry/wet
I/Os
Wet/dry
Analog or digital
Dry/wet
I/Os RIGHT
Analog or digital
Wet/dry
I/Os LEFT
S/PDIF In
Line Out
L+R
S/PDIF Out
Line In
L+R
POWER
USB DIGITAL I/0
OUT IN
IN
OUT
S/PDIF AES/EBU
CAUTION
8 Ohms 150W RMS REPLACE FUSE WITH SAME FUSE TYPE AND RATING
THRU INPUT TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAUTION
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE.
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK
DO NOT REMOVE COVER.
CAUTION !
PRE SIMULATION RISK OF ELECTRIC SHOCK
ANALOG INPUT SPEAKER DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
1
Wet return (TORPEDO to DAW)
Line Out to Line In
S/PDIF Out to S/PDIF In
AES Out to AES In
Torpedo VB-101
Note
or
Use this mode if you want to use your own audio interface to perform
or
the analog-to-digital (AD) conversion
Use this mode to use the TORPEDO VB-101 for the AD conversion
Use this mode to use the TORPEDO VB-101 for the AD conversion
Audio Interface
S/PDIF Out Wordclock
L+R Out
S/PDIF In Wordclock AES Out
L+R In
OPTIONAL ETHERNET
SYNC MIDI USB DIGITAL I/0
IN IN OUT/THRU OUT IN
IN
OUT
R o H S WORDCLOCK S/PDIF AES/EBU
2002/95/EC
NOTICE
LEFT RIGHT 8 Ohms 150W RMS
THRU INPUT
AUDIO ENGINEERING ALWAYS CONNECT YOUR AMP
OUTPUT TO A SUITABLE LOAD.
MADE IN FRANCE
SERIAL NUMBER
DO NOT SET YOUR AMP MASTER
VOLUME TO MAX IN ORDER
TO AVOID POSSIBLE DAMAGES . POST SIMULATION PRE SIMULATION
ANALOG OUPUTS ANALOG INPUT SPEAKER
2
Dry track status
Routed to Line out
(not Master)
Routed to S/PDIF Out
(not Master)
Routed to AES Out
(not Master)
Connecting the TORPEDO VB-101
Audio Interface
AES In AES Out Wordclock
L+R L+R Out
AES In Wordclock
L+R L+R In
POWER OPTIONAL ETHERNET
SYNC MIDI USB DIGITAL I/0
IN IN OUT/THRU OUT IN
IN
OUT
R o H S WORDCLOCK S/PDIF AES/EBU
2002/95/EC
CAUTION NOTICE
REPLACE FUSE WITH SAME FUSE TYPE AND RATING LEFT RIGHT 8 Ohms 150W RMS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK CAUTION THRU INPUT
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOSTURE. AUDIO ENGINEERING ALWAYS CONNECT YOUR AMP
CAUTION OUTPUT TO A SUITABLE LOAD.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SCHOCK MADE IN FRANCE
DO NOT REMOVE COVER.
SERIAL NUMBER
CAUTION ! DO NOT SET YOUR AMP MASTER
VOLUME TO MAX IN ORDER
RISK OF ELECTRIC SHOCK TO AVOID POSSIBLE DAMAGES . POST SIMULATION PRE SIMULATION
DO NOT OPEN ANALOG OUPUTS ANALOG INPUT SPEAKER
AVIS : RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
3
Wet track status
Routed to Master
Routed to Master
Routed to Master
25