Mains Power; Ground Connection; Mains Fuse; Safety Use Conditions - Two Notes TORPEDO VB-101 User Manual

Foreword

1.3 Mains power

Please verify that the voltage required by the device matches the voltage of your country. If not or
if unsure, do not plug the device to the wall outlet, as this could result in damages to the device and
injuries to the user. This product must not be used during lightning storms. In case of severe weather
with a risk of lightning, unplug the mains power supply to reduce the risk of electric shock and fire.
The mains power cable provided with the machine complies with the standards of the country where
you purchased the product. If replacement is needed, please use a standard compliant cable.

1.4 Ground connection

For safety reasons, the machine needs to be plugged into a wall outlet providing a ground con-
nection. If your electric installation does not provide a ground connection or if you are unsure, please
ask a qualified electrician for help.
If your mains power cable does not match your wall outlet, ask a qualified electrician for help.
In order to prevent risks of electric shock or fire, never remove the outer or inner ground connection
of the unit.

1.5 Mains fuse

The unit comes with a thermal fuse in the mains power input. If replacement is needed, first unplug
the mains power cable. Always use a fuse of the same type as the original one.
To prevent risks of electric shock and fire, never try to bypass the fuse by any means

1.6 Safety use conditions

The TORPEDO VB-101 must never be used:
• near a heat source,
• near a flame,
• in the rain,
• in damp areas,
• near any kinds of liquids.
The unit is designed to be rackmounted into a 19" rack unit with 4 screws (not provided).
When transporting the unit, care needs to be taken to avoid any shocks that might cause damage
and therefore require the assistance of a qualified technician.
Never cover or restrict the ventilation openings. Never unplug or deactivate the heat control
monitoring system, or you will be exposed to risks of electric shock and fire.

1.7 Cleaning

Always use a dry and soft cloth with no alcohol or solvent for cleaning. Please keep the unit clean
and free from dust.

1.8 Maintenance

Any and all maintenance tasks must be performed by service centers approved by OROSYS SAS
or by qualified technicians. Never try to repair the machine by yourself.
10 Two Notes Audio Engineering Torpedo VB-101