Frequently asked questions about What are TonePrints? TonePrint pedals Transferring TonePrints to your pedal using the TonePrint app Links Editing TonePrints with TonePrint Editor TonePrint resources Support resources Setup TC Electronic on… Ready… Set… Technical specifications Play! T2 Reverb English manual 2014-09-20...
– Consult the dealer or an experienced ra- caution when moving the cart/apparatus dio / TV technician for help. combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. T2 Reverb English manual 2014-09-20...
The exclamation point triangle is used to alert the user to presence of important operating and service instructions in the literature accompany- ing the product. T2 Reverb English manual 2014-09-20...
For ex- ample, clicking the logo in the upper left corner of each page will take you back to the table of contents. To download the most current version of this manual, visit tcelectronic.com/support/manuals/ T2 Reverb English manual 2014-09-20...
Grand Canyon and as hauntingly beautiful as sulting in optimum clarity and zero loss of high- the Aurora Borealis, T2 is a true testimony to the end. love of reverberating tones. T2 takes everything...
And how about doing this yourself? free software for popular smartphones that al- When you look at your TC Electronic effect ped- lows you to “beam” new TonePrints right into al, you’ll only see a few knobs. Actually, for some This is exactly what TonePrint allows you to do.
If you open the manual for TonePrint Editor in Last but not least… Adobe Reader, you can click on interface sec- tions to jump directly to the sections of the man- free! – TonePrint Editor is absolutely ual you are interested in. T2 Reverb English manual 2014-09-20...
Setup Ready… Set… Play! Your TC Electronic effect pedal box should con- – Connect a 9 V power supply with the follow- tain the following items: ing symbol to the DC input socket of your TC Electronic effect pedal. – Your TC Electronic effect pedal –...
MONO IN jack and the cable carrying the right Your TC Electronic effect pedal requires a 9 V signal component to the STEREO IN jack. power supply providing 100 mA or more (not Audio outputs (stereo) supplied).
Use the standard Mini-B USB port on your TC Please note that the knob assignments on your Use the MIX knob to control the level of the re- TC Electronic effect pedal are the default as- Electronic effect pedal to connect your pedal to verb.
This is a flanged reverb with classic 80’s sweep and responsive to pick attack and which strings that stays in tune. you’re playing. The low strings tend to have a low end heavy throbbing that transitions to a bub- T2 Reverb English manual 2014-09-20...
TC pedal has more than one LED, the leftmost LED should turn green. This indicates that the pedal is ready to receive the software update. – Release the footswitch. – Your TC pedal will now be recognized as an updatable device. T2 Reverb English manual 2014-09-20...
– you use a long cable between your guitar and removed from the pedal’s output. Use this mode the first pedal or when you place your TC Electronic effect pedal – if you use many pedals on your board or in a parallel effects loop.
But for 99 % of all amps, the TonePrint pedals will work just fine. For additional information about your TC Elec- tronic TonePrint effect pedal, please go to TC Electronic Support: tcelectronic.com/support/ T2 Reverb English manual 2014-09-20...
Technical specifications Technical specifications T2 Reverb English manual 2014-09-20...
Page 27
Standard 9 V DC, centre negative >100 mA (power supply not included) Battery option Standard 9 V (battery not included) Input impedance 1 MΩ Output impedance 100 Ω USB port Mini USB connector for uploading and editing custom TonePrints and for software updates T2 Reverb English manual 2014-09-20...
Page 28
Technical specifications T2 Reverb English manual 2014-09-20...
Need help?
Do you have a question about the T2 Reverb and is the answer not in the manual?
Questions and answers