Flex Br502 User Manual page 7

Setting the Alarm
Your Br502 pager allows you to set a daily alarm.
- From the Status screen, press the
" " screen displays
- A flashing " " or " " appears, toggle the
select ON or OFF. Press the
selection
Note: If you select OFF the pager will return to the Status screen. If you
select ON proceed to the next step
- Press the (Read/ Select) button to select the hour, then press the
(Function) button to set the hour
- Repeat the above steps to set minutes and "
set to display 12 hour time format
- When complete, press the
changes and return to the Status Screen
12
(Function) button 4 times until the
(Function) button to
(Read/ Select) button to confirm your
" or " ", if you pager is
(Read/Select) button to save your
Setting the Time
- From the Status screen, press the
until " " displays, then press the
- Press the (Function) button to select 12 or 24 hour time. When the
desired setting displays, press the
to the next field
- Press the (Function) button to increase the hour. When the desired
hour displays, press the (Read/ Select) button to advance to the next
field
- Repeat Step 3 to set the "minutes" and "A" or "P", if set to 12 hour time
format
- When you have finished setting the time, the
will return you to the Status screen
(Function) button 5 times
(Read/ Select) button.
(Read/ Select) button to advance
(Read/ Select) button
13