Flex Br502 User Manual page 11

Protecting/Unprotecting Messages
You can protect (save) up to 10 messages on the Br502. This prevents
messages from being deleted or overwritten by new messages when the
pager's memory is full.
- To protect a message, press the
message displays. When the word "
(Read/ Select) button to protect the message
- To unprotect a protected message, press the
while the protected message displays
- When the word "
button to unprotect the message
If at any time you wish to quit from the protect/unprotect message screen there are two methods for
escaping; 1) Press both + (Read/Select + Function) simultaneously to return to the message
screen, 2) Wait for 15 seconds to return to the Status screen.
20
(Function) button while the
" appears press the
(Function) button
" appears press the (Read/ Select)
Deleting Messages
You can delete messages from your pager at any time. By deleting older
messages, you decide which messages to keep and which to save before
they are overwritten by new messages. (See also "Protecting/Unprotecting
Messages" on page 20.)
Deleting an Individual Message
- To delete an unprotected message, press the
times while the message is displayed
*To delete a protected message, you must first unprotect the message.
(See "Protecting/Unprotecting Messages" on page 20)
- Press the (Read/ Select) button to confirm your decision
- To delete all messages see the instructions "Deleting All Messages" on
page 11
If at any time you wish to quit from the delete message screen there are two methods for escaping; 1)
Press both + (Read/Select + Function) simultaneously to return to the message screen, 2) Wait
for 15 seconds to return to the Status screen.
(Function) button two
21