Nikon D810 User Manual page 501

Exposure
Metering
Metering method
Range (ISO 100, f/1.4
lens, 20 °C/68 °F)
Exposure meter
coupling
Exposure mode
Exposure compensation –5 – +5 EV in increments of
Exposure bracketing
Flash bracketing
White balance
bracketing
TTL exposure metering using RGB sensor with
approximately 91K (91,000) pixels
• Matrix: 3D color matrix metering III (type G, E, and
D lenses); color matrix metering III (other CPU
lenses); color matrix metering available with
non-CPU lenses if user provides lens data
• Center-weighted: Weight of approximately 75%
given to 12 mm circle in center of frame.
Diameter of circle can be changed to 8, 15, or 20
mm, or weighting can be based on average of
entire frame (non-CPU lenses use 12-mm circle)
• Spot: Meters 4 mm circle (about 1.5% of frame)
centered on selected focus point (on center
focus point when non-CPU lens is used)
• Highlight-weighted: Available with type G, E, and D
lenses; equivalent to center-weighted when
other lenses are used.
• Matrix, center-weighted, or highlight-weighted
metering: 0–20 EV
• Spot metering: 2–20 EV
Combined CPU and AI
Programmed auto with flexible program (e);
shutter-priority auto (f ); aperture-priority auto
(g); manual (h)
2–9 frames in steps of
frames in steps of 2 or 3 EV
2–9 frames in steps of
frames in steps of 2 or 3 EV
2–9 frames in steps of 1, 2, or 3
/ /
1 1
, , or 1 EV
3 2
/ / /
1 1 2
, , , or 1 EV; 2–5
3 2 3
1 / 1 / 2 /
, , , or 1 EV; 2–5
3 2 3
477