Table of Contents
Advertisement
Additional preparation (continued)
Attaching the Twin Port Bass Blaster Unit
<AV-29V334/AV-25V334/AV-21V334 only>
The Twin Port Bass Blaster Unit is packaged together with the TV.
Before you use the TV, mount the Twin Port Bass Blaster unit
correctly on the TV.
• The SUPER BASS (BASS) function do not work unless the
Twin Port Bass Blaster Unit is connected correctly to the TV.
For details on the SUPER BASS (BASS) function, see page
12.
1
Place the unit on top of the TV making sure that the mounting
pin on the bottom of the unit fits into the mounting hole on the
top of the TV.
• When you mount the unit, make sure that the mounting pin
fits properly into the mounting hole. Otherwise, it may slide
off the top of the TV. This may cause damage or cause
unexpected injury.
Twin Port
Bass Blaster
Unit
CAUTION:
The Twin Port Bass Blaster Unit is just placed on top of the TV
and is not held in place by a screw. When using the unit, pay
attention to the following cautions. Otherwise, the unit or TV may
fall over and be damaged, or cause unexpected injury.
• Do not rest your hands or elbows on the Twin Port Bass
Blaster Unit.
• Do not move the TV with the Twin Port Blaster Unit mounted
on top of the TV. Before you move the TV, be sure to remove
the unit.
• Do not move the TV by holding the Twin Port Bass Blaster
Unit.
2
Firmly insert the Twin Port Bass Blaster Unit connector into
the BASS SPEAKER OUT terminal.
SPEAKER
COMPONENT
VIDEO-1
( VIDEO-2 )
OUTPUT
INPUT
INPUT
S
OVER
V
Y
V
/
V
BASS
L
C
L
L
B
/
/
OUT
MONO
MONO
R
C
R
R
R
21
Advertisement
Table of Contents
