Canon EOS 7D Mark II Instruction Manual page 513

AF area selection mode: Single-point Spot AF (manual selection), Single-point AF
AF point automatic
selection conditions:
AF Configuration Tool:
AI Servo AF
characteristics:
AF Custom Functions:
AF fine adjustment:
AF-assist beam:
• Exposure Control
Metering modes:
Brightness metering
range:
Exposure control:
ISO speed:
(Recommended
exposure index)
ISO speed settings:
Exposure
compensation:
(manual selection), AF point expansion (manual
selection: up, down, left, and right), AF point expansion
(manual selection: surround), Zone AF (manual
selection of zone), Large Zone AF (manual selection of
zone), 65-point automatic selection AF
Based on EOS iTR AF setting
(Enables AF incorporating human face/color information)
* iTR: Intelligent Tracking and Recognition
Case 1 - 6
Tracking sensitivity, Acceleration/deceleration tracking,
AF point auto switching
17 functions
AF Microadjustment (All lenses by same amount or
Adjust by lens)
Small series of flashes fired by built-in flash
Approx. 150,000-pixel RGB+IR metering sensor and
252-zone TTL metering at max. aperture
EOS iSA (Intelligent Subject Analysis) system
• Evaluative metering (linked to all AF points)
• Partial metering (approx. 6% of viewfinder at center)
• Spot metering (approx. 1.8% of viewfinder at center)
• Center-weighted average metering
EV 0 - 20 (at room temperature, ISO 100)
Program AE (Scene Intelligent Auto, Program), Shutter-
priority AE, Aperture-priority AE, Manual exposure, Bulb
exposure
Scene Intelligent Auto: ISO 100 - ISO 6400 set
automatically
P, Tv, Av, M, B: Auto ISO, ISO 100 - ISO 16000 (in 1/3- or
whole-stop increments), or ISO expansion to H1 (equivalent
to ISO 25600) or H2 (equivalent to ISO 51200)
ISO speed range, Auto ISO range, and Auto ISO
minimum shutter speed settable
Manual: ±5 stops in 1/3- or 1/2-stop increments
AEB: ±3 stops in 1/3- or 1/2-stop increments (can be
combined with manual exposure
compensation)
Specifications
513