Setting The Viewfinder Information Display - Canon EOS 7D Mark II Instruction Manual

3
Setting the Viewfinder Information DisplayN
The shooting function settings (Shooting mode, White balance, Drive
mode, AF operation, Metering mode, Image quality: JPEG/RAW, Flicker
detection) can be displayed in the viewfinder.
By default, only Flicker detection is checkmarked [X].
If no card is inserted in the camera, the image-recording quality will not be
displayed in the viewfinder.
When you press the <n> or <o> button, operate the lens's focus
mode switch, or when a lens equipped with electronic manual focusing is
used and the AF/MF switches as the lens's focusing ring is turned (p.119),
the respective information will appear in the viewfinder regardless of
whether it is checkmarked.
1 Select [Viewfinder display].
Under the [52] tab, select
[Viewfinder display], then press
<0>.
2
Select [Show/hide in viewfinder].
3
Checkmark [X] the information to
be displayed.
Select the information to display and
press <0> to append a checkmark
<X>.
Repeat this procedure to append a
checkmark [X] to all the information
to be displayed. Then select [OK].
When you exit the menu, the
checkmarked information will appear
in the viewfinder (p.27).
77