Connecting The Aerial And Vcr - JVC AV-21V311, AV-21V511, AV-21V531, AV-25V311, AV-25V511, AV-29V311, AV-29V511, AV-29V531 Instructions Manual

Preparation

3 Connecting the aerial and VCR

• Read the manuals provided with the devices. Depending on the device, the connection
method may be different from the diagrams. Also the device settings may need to change
depending on the connection method.
• Turn off all the devices including the TV.
• Connecting cables are not supplied.
• When connecting monaural audio to the TV, use the L/MONO jack.
• You can connect an S-VIDEO compatible device (such as an S-VHS VCR) to the S-connector
with an S-VIDEO cable and enjoy the high quality picture of the S-VIDEO signal (Y/C
signal). In that case, do not connect it to the TV with a video cable.
• If you connect the VCR to the TV only with an aerial cable, you should preset the video
channel from the VCR to the AV channel (channel number 0) on this TV. See "MANUAL CH
PRESET" on page 16 and preset it manually.
Connecting the aerial
COMPONENT
VIDEO-1
( VIDEO-2 )
INPUT
INPUT
S
OVER
V Y
/
V
L C L
B
/ /
MONO MONO
R C R
R
Connecting the aerial and VCR
To video
output
To S-video
output
4
OUTPUT
V
L
R
3
To audio
To RF
output
output
VCR
To aerial input
VHF/UHF outdoor aerial
Matching
aerial
adapter
(supplied)
VHF/UHF outdoor aerial
COMPONENT
VIDEO-1
( VIDEO-2 )
OUTPUT
INPUT
INPUT
S
OVER
V Y V
/
V
L C L L
B
/ MONO / MONO
R C R R
R
1
(1)
(2)
(3)
2