Contents Safety Precautions ... 15 Remote Control Buttons ... 16 Control Panel Buttons ... 17 Antenna Connections ... 17 Preparation ... 18 Features ... 18 Before Switching on your TV ... 18 Power connection ... 18 Aerial Connections ... 18 How to connect the external equipments ...
= Stand By / Power 0 - 9 = Direct Program Standard Button (PICTURE default settings) Colour Buttons MENU = Menu Button ) = Cursor Up / Programme Up ) = Cursor Right / Volume + Teletext Control Buttons VCR Control Buttons ) = Cursor Down / Programme Down ) = Cursor Left / Volume - AV = AV Button...
Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Features •...
Operating with the onset buttons Volume setting and programme selection can be made using the buttons on the front panel. Volume Setting: • Press “-VOL.” button to decrease volume or “VOL.+” button to increase volume, so a volume level scale will be dis- played on the screen.
Setting Hue (In AV mode only) : • Using “ “ or “ ” button select HUE. • Press “ ” button to increase HUE level. • Press “ ” button to decrease HUE level. HUE adjust is functional only when NTSC 3.58/4.43 is ap- plied in AV mode.
To programme a channel in a TV’s programme number manually: 1. PROGRAMME will be the first selected item as you enter the INSTALL. menu. Pressing “ ” or “ ” button select the programme number where you want to the tuned channel to be stored.
Press the VCR Control Button to control your VCR. Note: • If your device is not made by JVC, these buttons cannot be used. • Even if your device is made by JVC, some of these buttons or any one of the buttons may not work, depending on the device.
To Select Index Page • To select the page number of the index (generally page 100), press “ “ button. Searching for a teletext page while watching TV • In the Teletext mode pressing “ screen to the TV mode. In the TV mode enter a page num- ber using digit keys.
Connect the External Equipments Before connecting anything • Switch off all equipments including the TV. • Read the manuals provided with the equipments. To select an AV mode Pressing “AV” button on the remote control selects one of four AV modes (AV- 1, AV-2, AV-2 S and F-AV). •...
Via the Euroconnector Your TV set has two Euroconnector sockets. If you want to connect equipments (e.g. video recorder, decoder, etc.) which have Euroconnectors, to your TV, use the AV-1 (SCART 1) or AV-2 (SCART 2) terminals. If an external device is connected via Euroconnector sockets TV is switched to AV mode automatically.