Operating Environment - Roland Picza PIX-30 User Manual

5
When all installation finishes, the screen at below
appears.
Click [Close].
7
Remove the CD-ROM from the CD-ROM drive.
Setting Up the Mac OS Version of the Program

Operating environment

Computer
System
System Memory
Hard Disk
Setup
1
Turn off any virus-detection software.
2
Insert the Roland Software Package CD-ROM in the CD-ROM disk drive.
3
Double-click the CD-ROM icon.
5
When the screen shown right appears, click the allow in [Click
here], then choose [PIX-30].
Click [Install].
If there are programs you don't want to install, then clear their
check boxes before you click [Install].
6
The Installer's start screen appears. Follow the
messages to carry out setup and finish setting up the
program.
When installation is completed, remove the CD-ROM
from the CD-ROM drive.
16
A Power Macintosh, or PowerBook with a PowerPC processor.
Mac OS 7.5 or higher
20 MB or more (40 MB or more recommended)
3 MB or more of free space
6
After returning to the menu screen for installation, click
.
Dr.PICZA for Mac OS
4
Double-click the [Menu] icon.