Cutting A Three-Dimensional Object With A Modeling Machine - Roland Picza PIX-30 User Manual

Cutting a three-dimensional object with a modeling machine

Dr. PICZA has a function for exporting data to MODELA PLAYER. MODELA PLAYER is software for cutting three-dimensional
objects on the MODELA, CAMM-3, or CAMM-2, three-dimensional modeling machines made by Roland DG Corp. Dr. PICZA can
output 3D data directly to MODELA PLAYER. In this example, we'll use the MODELA in combination with Dr. PICZA to make a
paperweight in the shape of a leaf. The explanation assumes that you already have the MODELA installed and set up.
1
Get a suitable leaf from a tree, and
press it into a piece of clay to transfer
the image of the leaf to the clay.
3
Use [Edit] - [Invert] to invert the
scanned shape, then export the data to
MODELA PLAYER.
Before inversion
4
Use MODELA PLAYER to cut the shape on the
MODELA.
10
2
Set the piece of clay on the workpiece table and scan it with
the PIX-30.
After inversion
5
Color the cut object.
Export to
MODELA
PLAYER