Table of Contents
Advertisement
5.
Clean and uncluttered
common sense
and
supplied by The operaTor
1.
Prevent body contact with grounded surfaces such as pipes or radiators.
2.
Stay alert. Never operate equipment if you are tired.
3.
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on pre-
scriptions to determine if your judgment/reflexes might be impaired.
4.
Do not wear loose clothing or jewelry as they can be caught in moving parts.
5.
Non-skid footwear is recommended.
6.
Wear restrictive hair covering to contain long hair.
7.
Use eye and ear protection. Always wear:
a.
ANSI-approved dust mask or respirator when working around metal, wood, and chemical dusts
and mists.
b.
A full face shield if you are producing metal or wood filings.
c.
Ear protectors
8.
Maintain proper footing and balance at all times.
9.
Do not reach over or across running machines.
10.
Always check that adjusting keys and wrenches are removed from the tool or machine work surface
before plugging it in.
1.
Know the machine. Learn its applications and limitations, as well as the specific potential hazards.
2.
Check for damage. If part of the machine is damaged, it should be carefully inspected to ensure
that it can perform its intended function correctly. If in doubt, the part should be replaced.
3.
Be sure the switch is OFF before plugging in.
4.
Before starting machine check to ensure that all chuck keys, spanners and wrenches are removed
from the machine.
5.
Make sure guards are in place and working properly.
6.
Make sure tool has been cleaned and properly lubricated.
7.
Check for damaged parts. Before using any tool, any part that appears damaged should be care-
fully checked to determine that it will operate properly and perform its intended function.
8.
Check for alignment and binding of all moving parts, broken parts or mounting fixtures and any
other condition that may affect proper operation. Any part that is damaged should be properly re-
paired or replaced by a qualified technician.
9.
Do not use the tool if any switch does not turn off and on properly.
SKU 38119
For technical questions, please call 1-800-444-3353.
the Operator
cauTion
are facTors Which cannoT be builT inTo any producT
. p
:
lease remember
Before Operating
. T
hese facTors musT be
Page 5
Hide quick links:
Advertisement
Table of Contents
