Bryant Programmable Thermidistat Owner's Manual page 3

MODE button selects OFF, HEAT,
COOL or AUTO operation.
EMERGENCY HEAT (EHEAT) mode
is also included when the
thermidistat control is installed
with a heat pump.
PROGRAM button
starts the
programming
process and moves
you from one step to
the next.
COPY PREVIOUS
DAY button copies
the previous day's
comfort schedule
into the current
day's schedule.
CHANGE DAY
button advances you
to the next day to be
programmed and
advances the day
of the week
display.
SET TIME/TEMP button
allows you to enter
the time of day and
temperature settings.
Year-Round Comfort.
Bryant's Thermidistat
temperature and humidity control, this simple, yet powerful, device lets you take the steam out
of summer, the static out of winter and helps eliminate that annoying moisture build-up on
your windows when it's cold outside. It's never been quite this easy, and you've never had quite
this much comfort available through one control.
Simple, Convenient Control.
Bryant puts your family's comfort at your fingertips with simple instructions, responsive
push buttons and an easy-to-read, lighted display. Once set, the thermidistat control accurately
monitors indoor conditions and reliably meets your desired comfort levels. Plus, you have the
convenience of temporarily bypassing your settings without disrupting your permanent
comfort schedule.
ROOM TEMPERATURE
DISPLAY shows current
room temperature.
VACATION button
changes temperature
and humidity set
points to lower levels
HUMIDITY
for optimum energy
button changes
efficiency while
the display to
you're away.
show himidity
readings and
allows you to
change humidity
settings.
NOTE: Not all messages displayed in above illustration will appear at once in any situation.
Control provides enhanced, year-round comfort. By providing both
TM
OUTDOOR TEMPERATURE
TEMPERATURE SETTINGS
DISPLAY shows the
DISPLAY shows the
outdoor temperature.
temperature settings for
current time period.
FAN button chooses ON
or AUTO fan operation.
RESET FILTER
FUNCTION restarts
HOLD/END button
the timer that
maintains the current
determines the next
temperature settings.
air filter change or
Also used to end
cleaning. Ac
temperature and
tivated by pressing
humidity programming
VACATION and
sequence.
END buttons
simultaneously.
TIME OF DAY
DISPLAY exhibits the
time of day.
CLEAN FILTER
INDICATOR lets you
know it is time to
clean or replace your
system's air filter.
AUXILIARY HEAT
INDICATOR is
displayed when a
heat pump system's
auxiliary heat is on.
UP AND DOWN
buttons change the
temperature and
humidity set points.
They are also used to
access outdoor
temperature and
indoor humidity
levels.