Bryant Programmable Thermidistat Owner's Manual page 13

PROGRAMMING THE THERMIDISTAT CONTROL
7
Press the PROGRAM button to
advance to the next time period. Following
your personalized comfort schedule, enter
times and temperatures for DAY, EVE, and
SLEEP time periods.
You have now programmed 1 day into your
Thermidistat Control. At this time, you can
either repeat steps 1-7 until all days of the
week have been programmed, OR you can
copy the schedule onto the remaining days of
the week. See the section on "Copying a
daily schedule" for details.
NOTE: During programming, if you have not
touched a button or made an entry within 3 min-
utes, the programming mode will automatically
shut off. Anything you have programmed will be
saved.
8
Press the HOLD/END button when
you finish entering your comfort schedule.
NOTE: Once you've programmed your comfort
schedule, the Thermidistat Control will continue
operating on that program until you enter an
alternative schedule. It may be appropriate to
adjust temperatures as seasons change.
9