What Happens In Each Cycle - Whirlpool 3401087 Use And Care Manual

What happens in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to
the selected load size) before agitation and
timing start. The washer will begin agitating
immediately after filling; agitation can occur
with the washer lid up or down. After agita-
tion starts, the Cycle Control Knob turns
clockwise until it points to OFF and the cycle
ends.
The washer pauses briefly throughout
each cycle.
These pauses are normal for
washer operation.
NOTE:
A Gentle Wash system helps protect
your fabrics by reducing wash agitation
speed during the last few minutes of wash
agitation in the Regular and Permanent
Press cycles.
WASH RINSE
M
4
Fill
Wash*
'Agitation speed is red&d in the last few
minutes of most cycles. This provides
better fabric care.
Drain (or partial drain*)
No agitation
*The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
:.j:
L4l
Spin
M
4
Fill
Ii ..
b&II
I
Rinse
u
-i;- Drain-No agitation
:: .:. :. w .
Spin-Spray rinse
&J
Spin
Ll :::.
,.,:j::,:.
11