What
happens
in each cycle
When the Cycle Control Knob is set to a
number and pulled out, the washer fills (to the
selected load size) before agitationand timing
start. The washer will begin agitating immedi-
ately after filling; agitation can occur with the
washer lid up or down. After agitationstarts,
the Cycle Control Knob turns clockwiseuntil it
points to OFF and the cycle ends.
The washer pauses briefly throughout each
cycle. These pauses are normal for washer
operation.
NOTE: A Gentle Wash system helps protect
your fabrics by reducing wash agitationspeed
duringthe last few minutes of wash agitation in
the Regular and Permanent Press cycles.
WASH
Fill
Wash*
°Agital_on speed is reduced in the last few
minutesof mostcycles.This provides
betterfabric care.
_j
Drain (or partial drain*)
No agitation
*The Permanent Press cycle partially
drains, fills, agitates briefly, and drains.
_[_
Spin
RINSE
Fill
Rinse
_
Drain-No agitation
_
Spin-Spray rinse
Spin
U
Off
11