Table of Contents
Advertisement
Glossary
Device or Node
Inclusion
Exclusion
Remove
Z-Wave Network
Primary Controller
Secondary Controller
Inclusion Controller
Scene
Devices and nodes are all terms to describe an individual Z-Wave
device. These are all interchangeable when setting up your Z-Wave
network.
Add a Z-Wave device to the network.
Delete a Z-Wave device from the network.
To take a device out of a group, scene or association group while
that device still exists in the same Z-Wave network.
A collection of Z-Wave devices controlled by primary and
secondary controllers operating on the same system. A Z-Wave
network has its own unique ID code so that controllers not in the
network cannot control the system.
The first controller used to set up your devices and network. Only
the Primary Controller can be used to include or delete devices
from a network. It is recommended that you mark the primary
controller for each network for ease in modifying your network.
A controller containing network information about other devices
within the network and is used for controlling devices. Secondary
controllers are created from the Primary Controller and cannot
include or delete devices to the network.
A controller containing network information about other devices
within the network and is used for controlling devices. Inclusion
controllers are created from the Primary Controller in a SIS enabled
Z-Wave network. Inclusion Controller has the ability to add and
remove devices from the network.
A collection of Z-Wave devices configured to turn to a specific
level, setting, mode, or perform an operation. Scenes are usually
activated by a controller, timed event, or specific conditions.
5
Advertisement
Table of Contents
