Configuration Note
4.3
Configure SIP Transport Type
The procedure below describes how to set the SIP transport type to TLS.
To configure SIP Transport Type:
1.
Open the SIP General Parameters page (Configuration tab> VoIP menu > SIP
Definitions > General Parameters).
2.
From the 'SIP Transport Type' drop-down list, select TLS.
3.
In the 'SIP Destination Port' , enter 5061
4.
Click Submit.
Version 6.8
Figure 4-3: SIP General Parameters
23
4. Configure AudioCodes Mediant Gateway
February 2014