Configure Audiocodes Mediant Gateway; Configure Ip Network Interfaces; Figure 4-1: Configured Network Interfaces In Ip Interfaces Table - AudioCodes Mediant Series Configuration Note
Mediant series voip media gateways for microsoft office 365, exchange online unified messaging with legacy pbx
Hide thumbs
Also See for Mediant Series:
- Quick setup manual (48 pages) ,
- Quick setup manual (50 pages)
Table of Contents
Advertisement
Configuration Note
4
Configure AudioCodes Mediant Gateway
Using your Web browser, connect to the gateway's administration interface (the default
address is 192.168.0.2).
After providing the required credentials (the default user name is "Admin" and the default
password is "Admin"), the Home page of the Web interface is displayed.
Use the Full navigation menu tree to perform gateway configuration.
4.1
Configure IP Network Interfaces
The procedure below describes how to assign an IP address to the VoIP / Management
LAN interface.
To configure the IP network interfaces:
1.
Open the IP Interfaces Table page (Configuration tab > VoIP menu > Network > IP
Interfaces Table).
2.
Modify the existing LAN network interface:
a.
Select the OAMP + Media + Control table row, and click Edit.
b.
Configure the interface as follows:
Interface Mode
IP Address
Prefix Length
Default Gateway
Interface Name
Primary DNS
Secondary DNS
Underlying Device
3.
Click Submit; the configured IP network interfaces are shown below:
Figure 4-1: Configured Network Interfaces in IP Interfaces Table
Version 6.8
Parameter
21
4. Configure AudioCodes Mediant Gateway
Value
IPv4 Manual
195.189.192.155 (IP address of gateway)
25 (subnet mask in bits for 255.255.0.0)
195.189.192.129
Voice (arbitrary descriptive name)
80.179.55.100
80.179.52.100
vlan 1
February 2014
Advertisement
Table of Contents
