Pedal Assign - Kawai Concert Performer CP3 Owner's Manual

3) Pedal Assign

The Soft, Sostenuto and Damper pedals on the Concert Performer function as much more than just traditional
piano pedals. These pedals can be assigned to control various other functions on the CP piano.
Note:
The settings you make for the Soft (left) and Sostenuto (center) pedals here in the system are different from the settings
in the KBD Settings button menu. When the KBD Settings button is turned On, the performance menu settings for these
pedals will override the system settings. When the KBD Settings button is turned Off the settings made here in the system
will be used.
Damper Pedal (Right)
Sustain
Damper Hold
Pedal assignment options for Soft Pedal (Left) and Sostenuto Pedal (Center)
Soft
Sostenuto
Start/Stop
Harmony on/off
Registration
Style Variation
Intro/Ending
Fill In
Break
Drums Only
Sync/Fade Out
Glide
Modulation
Rotary Fast/Slow Controls the speed of rotary speaker effect. This function will be automatically assigned to the Soft
Left Hand Hold
Panel Lock
Easy Loop
The pedal assignments made to the Left pedal will be saved as part of a Registration. The pedal assignments made to
the Center pedal are global and are not saved as part of a Registration.
Can be activated or deactivated separately for each Part.
The Damper Hold On/Off allows you to determine if the sound such as organ or strings should be held
(on) or gradually decayed (off) when the damper pedal is depressed.
Softens the sound and reduces its volume.
Sustains only notes that were held when pedal was depressed.
Controls start/stop for Styles and Songs.
Turns the instrument Harmony function on/off.
Switches from one Registration to another. You may choose the order, 1 to 8 or 8 to 1.
Switches from one Style Variation to another. You may choose the order, 1 to 4 or 4 to 1.
Plays the Intro or Ending.
Plays the Fill-in currently selected.
Interrupts the whole Style.
Interrupts the Style except Drum part.
Controls the SYNC/FADE OUT button.
Bends the pitch up and down as programmed by you.
Applies programmable vibrato to the sound.
Pedal (Left) when a sound that has the rotary effect turned on is selected as the Priority Part.
Holds the notes played in the LEFT/SPLIT Part as long as the pedal is depressed.
Locks all buttons on the panel to prevent them from being tampered with or pressed accidentally while
you are playing. Press the assigned pedal once to lock the panel buttons. Press the assigned pedal
again to unlock the panel buttons.
Repeats the selected bars again and again. 1st press: assign the loop top, 2nd press: assign the loop
end, 3rd press: cancel the loop.
Page
95
7