Keyboard Harmony - Kawai Concert Performer CP3 Owner's Manual

6) Keyboard Harmony

When the Auto-Accompaniment is enabled, selecting the Keyboard Harmony function will automatically add notes
to your right hand (melody) part, helping you to sound more professional. This function analyzes the notes you play
and automatically adds notes from the Accompaniment chord (shown in the Main Screen when the Accompaniment
is on), creating a "harmony" part (even if you are only playing single notes in the left and right hands).
There are 10 types of Harmony.
Block Adds three or four notes based on the chord.
Open Adds three or four notes based on the chord. Harmony notes may extend over one octave below the lowest
right-hand note.
Jazz Adds three or four notes based on the chord.
Rockn' Adds a note at a fifth (or fourth) interval to the lowest note played in the RIGHT Part.
Dynamic Adds three or four notes based on the chord. Harmony notes are played within one octave below the lowest
note played in the right hand.
Duet Adds a note according to the lowest note played in the right hand and based on the chord.
Octave Takes the highest note played in the right hand and doubles it an octave down.
Octave Duet Adds an Octave note and a Duet note.
Vocal 1 Adds a single note above the top note of the right hand based on the chord.
Vocal 2 Adds three notes based on the chord. The lowest note will always be the root of the chord.
To use Harmony:
Step 1
Press the KBD HARMONY button.
The button will be lit to show that it is active. The Harmony symbol will also appear in the Main Screen.
Step 2
To change the Harmony type, hold down the KBD HARMONY button for a moment until the Harmony
Select menu is displayed.
Step 3
Touch the desired Harmony type to select it.
Step 4
Press the EXIT button to leave the Harmony Select menu.
Step 5
To turn off the Harmony, press the KBD HARMONY button again.
The additional notes created by Harmony are added to the RIGHT1 Part, if that part is on. If the RIGHT1 Part is off, the
additional notes are added to the RIGHT2 Part. If both parts are off, there will be no Harmony even though the KBD
HARMONY button is lit. The Harmony notes are played with the same sound as the part they are added to.
You can volume mix the Harmony separately in the MIXER screen.
If the Accompaniment is not enabled, you will not be able to activate Harmony.
Touch the screen to select your desired Harmony
type.
Page
69
5