Kbd Settings Button; Left Pedal And Center Pedal Override - Kawai Concert Performer CP3 Owner's Manual

Page
30

8) KBD Settings Button

The KBD SETTINGS button puts several useful performance functions conveniently at your fingertips by grouping
them under one button. You can customize settings and access them via the KBD SETTINGS button for the
following functions:
• LEFT pedal override
• CENTER pedal override
• KBD SETTINGS button
• LEFT mode
• LEFT split point
3

LEFT PEDAL and CENTER PEDAL Override

You can assign the following four functions to the left pedal and center pedal. Settings made in the KBD SETTINGS
button menu will override the settings made in the system.
Glide
Modulation
Registration Increment
Registration Decrement
To set the pedals:
Step 1
Press and hold the KBD SETTINGS button.
Step 2
Touch LEFT PEDAL OVERRIDE or CENTER PEDAL OVERRIDE and use the Dial to select the function
to be assigned to the pedals.
When Glide or Modulation is selected, additional settings can be adjusted using the edit button:
Step 3
Press the KBD SETTINGS button to exit this screen.
Step 4
Press the KBD SETTINGS button again.
The KBD SETTINGS button LED will turn on and the settings for the pedals will override the system settings. If the
LEFT or CENTER pedal is set to None, the system settings for that pedal will be used. The words LP or CP will be
displayed in the upper left on the main screen to indicate the LEFT or CENTER pedal override is active.
Step 5
Press the KBD SETTINGS button.
The LED will turn off and the system settings for the pedals will be used. The words LP or CP will disappear from
the main screen.
Bends the pitch up and down as programmed by you.
Applies programmable vibrato to the sound.
Switches from one Registration to another 1 to 8.
Switches from one Registration to another 8 to 1.
The KBD Settings screen will be displayed.