Pedal Assign - Kawai Concert Performer Series Digital Piano CP117 Owner's Manual

System Menu

Pedal Assign

The Soft and Sostenuto pedals on the Concert Performer function as much more than just traditional
piano pedals. These pedals can be assigned to control various other functions on the CP piano.
Damper Pedal (Right)
Sustain only Can be activated or deactivated separately for each Part.
Pedal assignment options for Soft Pedal (Left) and Sostenuto Pedal (Center)
Soft Softens the sound and reduces its volume.
Sustains only notes that were held when pedal was depressed.
Sostenuto
Start/Stop Controls start/stop for Styles and Songs.
Harmony on/off Turns the instrument Harmony function on/off.
Registration Switches from one Registration to another. You may choose the order,
1 to 8 or 8 to 1.
Style Variation Switches from one Style Variation to another. You may choose the
order, 1 to 4 or 4 to 1.
Intro/Ending Plays the Intro or Ending.
Fill In Plays the Fill-in currently selected.
Break Interrupts the whole Style.
Drums Only Interrupts the Style except Drum part.
Sync/Fade Out Controls the SYNC/FADE OUT button.
Glide Bends the pitch up and down as programmed by you.
Modulation Applies programmable vibrato to the sound.
Rotary Fast/Slow Controls the speed of rotary speaker effect. This function will be
automatically assigned to the Soft Pedal (Left) when a sound that has
the rotary effect turned on is selected as the Priority Part.
Left Hand Hold Holds the notes played in the LEFT/SPLIT Part as long as the pedal is
depressed.
Locks all buttons on the panel to prevent them from being tampered
Panel Lock
with or pressed accidentally while you are playing. Press the assigned
pedal once to lock the panel buttons. Press the assigned pedal again to
unlock the panel buttons.
P. 109