Yamaha Silent Brass Personal Studio ST5 User Manual page 18

3 Use the EDIT Q/W buttons to select the effect
block you want to edit.
Every time one of the EDIT Q/W buttons is pressed,
the next effect block according to the order shown in
the illustration below will be selected and its icon will
blink.
* The parameter cannot be edited if the Effect Block is
switched "OFF". To switch the Effect Block "ON", Use the
EDIT Q/W buttons to select the effect, then press the BY-
PASS button.
18
The display when
the effect is OFF.
Blinks
To demonstrate, let's select the D/R (Delay/Reverb)
effect block. Use the EDIT Q/W buttons and select D/
R, the D/R icon will blink.
4 Edit the selected effect block.
Use the +/- buttons to select an effect type edit the
parameter from the selected effect. Then use the Value
Dial to set the parameter's value.
The display when
the effect is ON.
Blinks
Value Dial
Blinks