Part Names And Functions; Front/Top - Epson EB-G6900WU User Manual

Part Names and Functions

The illustrations in this guide are for EB-G6900WU (with the standard
zoom lens ELPLS06 attached).

Front/Top

Name
A
Exhaust vent for air used to cool the projector internally.
Air exhaust vent
Function
Caution
While projecting, do not put your face or hands
near the air exhaust vent, and do not place objects
that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could
cause burns, warping, or accidents to occur.
Name
B
Focus ring Adjusts the image focus.
s "Correcting the Focus"
C
Adjusts the image size.
Zoom ring
s "Adjusting the Image Size"
D
When replacing the lens unit, press this button and then
Lens unit removal
remove the lens unit.
button
s "Removing and Attaching the Projector Lens Unit"
p.16
E
Receives signals from the remote control.
Remote receiver
F
The color of the indicators and whether they are flashing
Status indicators
or lit indicate the status of the projector.
s "Reading the Indicators"
G
Takes in air to cool the projector internally.
Air intake vent
(air filter)
s "Cleaning the Air Filter"
H
Air filter cover Use this knob to open the air filter cover.
operation knob
s "Replacing the Air Filter"
I
Cover for the rear interface cable connection section.
Cable cover
s "Attaching the Cable Cover"
J
Turn the dial to move the position of the projected image
Vertical lens shift dial
up or down.
s "Adjusting the Position of the Projected Image (Lens
Shift)"
K
Locks or releases the lens shift dials.
Lens shift dial lock
L
Turn the dial to move the position of the projected image
Horizontal lens shift
left or right.
dial
s "Adjusting the Position of the Projected Image (Lens
Shift)"
M
Open when replacing the projector's lamp.
Lamp cover
s "Replacing the Lamp"
Function
p.26
p.26
p.105
p.121
p.127
p.38
p.24
p.24
p.124
8