Table of Contents
Advertisement
Multi-Projection Function
c
Select Area Correction, and then press the [
] button.
d
e
The points where you want to set the range for black level
adjustment are displayed.
The points are displayed to match the Top Edge/Bottom Edge/Right
Edge/Left Edge settings.
The number of points displayed on one side differs depending on the
adjustment method selected in geometric correction.
Example: When Left Edge is set and Point Correction (5x5) is
selected
Use the [
], [
], [ ], and [ ] buttons to select the point you
want to move, and then press the [
The selected point is displayed in orange.
Use the [
][
][ ][ ] buttons to move the point.
62
] button.
Advertisement
Table of Contents
